When using Air10s or MG80 Pro (Commander mode) for Canon or Nikon, the firmware version of AirR must be the latest version (1/3EV step light control version).

If the firmware version of AirR is old (1/3EV step dimming not supported), you can temporarily downgrade the firmware version of Air10s to control AirR from Air10s (MG80 Pro cannot control AirR with old firmware even after downgrading). However, the MG80 Pro/MG10/MG8 Advanced Mode, OPEN Mode, and Remote shutter function will not function properly, so you will need to rewrite the firmware if necessary.