[Air10s, MG80 Pro, AirR] The flash on the AirR cannot be fired from the camera with Air10s or MG80 P...

When using Air10s or MG80 Pro (Commander mode) for Canon or Nikon, the firmware version of AirR must be the latest version (1/3EV step light...

[Air10s, MG80 Pro] What will happen if I combine Air10s/MG80 Pro with a model that does not allow 1/...

Pairing, setting, and firing all work fine. However, the flash output step width depends on the flash specifications and varies by 1/2EV ste...

The Air1 has two modes: “Standard Mode (MODE1)” which works the same as when the flash is attached on top of the camera, and ...

Since the light emitted from a flash tube of a flash is bluish white, the color of the light is generally adjusted with a fresnel lens. The ...

The MG80 Pro, Di700A (for Canon and Nikon), and MF18 use a screw-type locking mechanism. This mechanism is designed so that by turning the s...

Yes, all of our current models support High Speed Synchro (FP flash / HSS).Please refer to the manual of the model you are using as the sett...

The flash or commander may not be inserted deep enough into the camera hot shoe.Make sure to insert it all the way in.Be especially careful ...

It is likely that the camera’s red-eye reduction flash is turned on.Please turn off the red-eye reduction emission from the camera men...