[Air10s, MG80 Pro, AirR] The flash on the AirR cannot be fired from the camera with Air10s or MG80 P...

When using Air10s or MG80 Pro (Commander mode) for Canon or Nikon, the firmware version of AirR must be the latest version (1/3EV step light...

[All Flash and Commander models] Does the camera support high-speed sync (FP flash / HSS)?

Yes, all of our current models support High Speed Synchro (FP flash / HSS).Please refer to the manual of the model you are using as the sett...

The flash or commander may not be inserted deep enough into the camera hot shoe.Make sure to insert it all the way in.Be especially careful ...

One of the key features of Nissin’s unique wireless flash control system, NAS (Nissin Air System), is that it allows only paired devic...

If Air10s or MG80 Pro (Commander mode) does not communicate (cannot be controlled) with a flash other than MG series (Di700A, i60A, AirR), p...

Our flashes, commanders and receivers do not work properly even if firmware is rewritten by replacing only the mounting foot with another mo...

In this case, the following causes are possible. If you are using Air 1, Air 10s, or MG80 Pro (Commander mode), please refer to the FAQ for ...

The flash does not work, the picture is dark even when use the flash. In those cases, the strobe may be broken, but the hot shoe contacts ar...