[Air10s, MG80 Pro, AirR] The flash on the AirR cannot be fired from the camera with Air10s or MG80 P...

When using Air10s or MG80 Pro (Commander mode) for Canon or Nikon, the firmware version of AirR must be the latest version (1/3EV step light...

[Air10s, MG80 Pro] What will happen if I combine Air10s/MG80 Pro with a model that does not allow 1/...

Pairing, setting, and firing all work fine. However, the flash output step width depends on the flash specifications and varies by 1/2EV ste...

Yes, all of our current models support High Speed Synchro (FP flash / HSS).Please refer to the manual of the model you are using as the sett...

The flash or commander may not be inserted deep enough into the camera hot shoe.Make sure to insert it all the way in.Be especially careful ...

It is likely that the camera’s red-eye reduction flash is turned on.Please turn off the red-eye reduction emission from the camera men...

One of the key features of Nissin’s unique wireless flash control system, NAS (Nissin Air System), is that it allows only paired devic...

If Air10s or MG80 Pro (Commander mode) does not communicate (cannot be controlled) with a flash other than MG series (Di700A, i60A, AirR), p...

Our flashes, commanders and receivers do not work properly even if firmware is rewritten by replacing only the mounting foot with another mo...