Cameras and combinations not listed here have not been tested. Please note that we are unable to answer any questions regarding the operation of these cameras.
FP/HSS (High Speed Synchro) flash is supported only in combination with a camera equipped with this function.
AF-assist lamp is not supported on Mirrorless cameras.
For Canon
The following camera names are listed by their Japanese names.
If you have a product for North America, Europe, or Asia, please use this link to look up the Japanese name.
EOS R3*1
EOS R10 / R8*2*3 / R7*2*3 / R6 / R5 / RP / R
EOS-1D X / 1Ds Mark III / 1Ds Mark II / 1D Mark IV / 1D Mark III / 1D Mark II N / 1D Mark II
EOS 7D Mark II / 7D / 6D / 5D Mark III / 5D Mark II / 5D
EOS 90D / 70D / 60D / 50D / 40D / 30D / 20D / 10D
EOS 8000D / Kiss X10i / Kiss X9 / Kiss X7i / Kiss X7 / Kiss X6i / Kiss X5 /Kiss X4 / Kiss X3 / Kiss X2 / Kiss Digital X / Kiss Digital N / Kiss Digital
EOS Kiss F / Kiss X70 / Kiss X50
The following cameras are not compatible with this product. EOS-1D X Mark II / 5D Mark IV / 6D Mark Ⅱ/ 80D / 9000D / Kiss X8i / Kiss X9i EOS-1D / 1Ds / EOS M series / PowerShot series
*1 When high-speed synchro is used in TTL mode, synchronization failure may occur. *2 When high-speed synchro is used in Manual mode, synchronization failure may occur. *3 The camera may underexpose by about 1 EV when shooting close-up in TTL mode.
The following cameras are not compatible with this product. D2Hs / D2H / D100 / D1H / D1 / COOLPIX series / FinePix S3 Pro
*1 For use with the Z series and D6, the MF18 firmware version must be updated to 12-9 or higher. *2 The camera’s auto power off function may not be working properly. Operate the power switch to turn off the camera.
*3 Tends to underexpose when using auto FP flash.
*4 To use with Z fc, please update the camera firmware version to 1.20 or higher. *5 The MF18 firmware versions 11-7 to 12-9 do not dim properly in A mode and TTL mode.
For Sony
α7c / 7 / 7 II / 7 III / 7 IV / 7s / 7R II / 7R III / 7R IV / 7R V
α3000*1 / 6000 / 6300 / 6400 / 6600
77 II / 99
NEX-6
Cyber-shot RX1 / RX10 / HX60V
The following cameras are not compatible with this product. RX100 II
*1 The wireless mode of this unit cannot be used.
Remark:
1. The light compensation function of the camera may not work properly with some cameras. The strobe’s light compensation function works properly.
2. For Sony cameras, the wireless strobe side will not fire unless the flash mode is set to [WL (Wireless)] in the camera menu or the wireless flash function is set to [On].