Air R compatibility chart for speedlights
- Cameras and combinations not listed here have not been tested. Please note that we are unable to answer any questions regarding the operation of these cameras.
- When using this unit, be sure to also check the camera compatibility chart of the commander you have paired with.
Remark:
1. When controlling with Air10s, it may not work properly if the firmware of Air10s and the monitoring system is not the latest version.
2. When using AirR, all mount types of [camera, commander (Air1/Air10s), Air R and speedlights to be mounted on AirR] must match each other for proper operation.
Example:
Camera/Commander for Canon, AirR/speedlight for Nikon >> Does not work.
Camera/Commander/AirR/Speedlight are all for Canon >> It works!
3. When using AirR, light intensity measurement (flash meter, etc.) is not possible with test firing by commander operation.
4. Speedlight such as i400 and i40 which automatically change beam angle when the speedlight head is not in front cannot be adjusted via commander when the speedligh head is facing other than front.
- For Canon
- Nissin MG8000* / Di866 MARK2* / Di866* / Di700* / Di600* *1 / Di622 MARK2* *1 / Di622* *1
i40* / Di466* *1 / Di28* *1
Canon 600EX II-RT* / 600EX-RT* / 580EX II* / 580EX* / 550EX* / 430EX III-RT* / 430EX II* / 430EX* / 320EX* / 270EX II* / 220EX* - The following speedlights are not compatible with this product.
540EZ / 430EZ / 420EZ / 300EZ / 200E / 480EG (use TTL Cable) - *1 The speedlight does not support HSS (high-speed sync), so it will not work in HSS mode.
- Remark:
” * ” and ” * ” after the model name indicate the color of the AirR when the “Guide no. mode” is set. For details on how to set the “Guide no. mode”, please refer to the instruction manual.
- For Nikon
- Nissin MG8000* / Di866 MARK2* / Di866* / Di700* / Di600* *1 / Di622 MARK2* *1 / Di622* *1
i40* / Di466* *1 / Di28* *1
Nikon SB-5000* / SB-910* / SB-900* / SB-800* / SB-700* / SB-600* / SB-500* - The following speedlights are not compatible with this product.
SB-80DX / SB-50DX / SB-30 / SB-29 / SB-29s / SB-28DX / SB-28 / SB-27 / SB-23 / SB-22s / SB-16 - *1 The speedlight does not support high-speed sync, so it will not work properly in Auto-FP mode.
- Remark:
1. ” * ” and ” * ” after the model name indicate the color of the AirR when the “Guide no. mode” is set. For details on how to set the “Guide no. mode”, please refer to the instruction manual.
2. The camera does not work properly when used with the following cameras. Supported plans are undecided.
Z f
- For Sony
- Nissin i40* / i400*
SONY HVL-F32M* / HVL-F43M* / HVL-F46RM* / HVL-F60M* / HVL-F60RM* - Remark:
1. ” * ” and ” * ” after the model name indicate the color of the AirR when the “Guide no. mode” is set. For details on how to set the “Guide no. mode”, please refer to the instruction manual.
2. The Air 1 firmware must be Ver. 2.0 or later to work properly.
3. If you are using one of the following cameras, High-Speed Sync cannot be used unless the AirR firmware is Ver. 2.0 or later. (Functions other than High Speed Sync are available.)
α99 II / α6500 / α7R III / α7 III (As of January 2019.)
and the following cameras that have applied firmware released on or after June 8, 2017
α9 / α7 II / α7S II / α7R II